Ligchine laser-guided screeds (LS120, SpiderScreed, ScreedSaver)
A range of laser-guided concrete screeds: boom machines that reach out over the pour and drive-in machines that work inside it. A laser receiver on the screed head holds grade, single or dual slope as the concrete is struck off; Topcon or Leica 3D control can be added for contoured slabs. The LS120 has a 16 ft boom and 8 ft head; the SpiderScreed is a 1,280 lb drive-in unit light enough for upper decks.
- Review no.
- RS-R1171
- Revision
- C
- Read at source
- 11 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the operative on the drill, the breaker, the screed or the jig. A machine that does one repetitive task to the model, with a person setting it up. Ligchine's laser screeds reach over or drive into the pour; by quote, with used machines offered. The catch: by quote, a trained crew to run it, and most need a model or a factory to work from.
The catch
No price is published; machines are sold by quote, with financing and used machines offered. The 3D system is an extra on top of the standard 2D laser.
- United States: on sale
What it replaces
Hand screeding with straightedges, and the manual checking of levels that goes with it.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with Ligchine laser-guided screeds (LS120, SpiderScreed, ScreedSaver)? Tell us how it went
Source and revisions
Source: Ligchine LS120 laser-guided concrete screed
Availability read at: United States
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/ligchine-laser-guided-screeds"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>