Skip to content
REDSTICK⌕
SaaSFire protectionIntumescent and fire protective coating specification for steel

Intumescent calculator for steel

Gives the dry film thickness of Tikkurila's Fontefire ST 60-1 coating needed for a steel member, from the fire resistance period, critical temperature and section factor. If the section factor is not known it can be worked out from a list of common steel sections.

Review no.
RS-R738
Revision
C
Read at source
12 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces working the coating thickness for every steel section from the manufacturer's tables. Free tools from the coating makers: enter the section, the period and the critical temperature, get the thickness and the paint. Tikkurila's calculator gives the dry film thickness for one product, Fontefire ST 60-1. The catch: each covers its own maker's products only; the thickness is the coating maker's answer for its own product.

The catch

Covers one product only, Fontefire ST 60-1.

Who forSpecifiers and coating contractors pricing or specifying Fontefire ST 60-1 on structural steel.
By whomTikkurilatikkurila.com ↗
Releasedto check
Sold in
Europe
  • Finland: on sale
PriceNot publishedPrice or free use not stated on the page.

What it replaces

Looking up thicknesses in the product's loading tables.

Who else does it

Compare all 5 for intumescent and fire protective coating specification for steel side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Intumescent calculator for steel? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Intumescent calculator for steel

RevDateChange
C12 Nov 2026Re-read at source (hunt run 2026-11-12s): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/intumescent-calculator-for-steel"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>