Skip to content
REDSTICK⌕
RobotConcreteMasonryPrecast and modular3D printing walls and buildings on site

INSTATIQ P1

A mobile large format robot that prints concrete walls and structures layer by layer on site from a digital building model. The maker gives a print speed of 10 cm/s, a set up time of 60 minutes and a reach of 26 m.

Review no.
RS-R1578
Revision
C
Read at source
13 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the blocklayer and the formwork for the walls. A printer that extrudes concrete or earth walls from the drawing, layer by layer. INSTATIQ P1 prints concrete walls on site with a 26 m reach, 10 cm/s and an hour's set-up by the maker's figures; projects so far with named partners, no price. The catch: a big machine, a print crew and a printable mix, and the walls are the easy part of a house.

The catch

No price or terms published; projects so far are run with named construction partners.

Who forContractors and developers building houses and commercial buildings in printed concrete.
By whomINSTATIQ GmbH
Germany
instatiq.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceNot publishedNo price published.

What it replaces

Formwork and masonry for walls that suit printing.

Who else does it

Compare all 12 for 3d printing walls and buildings on site side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with INSTATIQ P1? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: 3D-Betondruck - INSTATIQ | Plan. Print. Progress.

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B15 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A13 Nov 2026First read at source (hunt run 2026-11-13x).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/instatiq-p1"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>