G-Earthwork
A LiDAR sensing system for excavators that works out the machine's position and the shape of the dug ground in real time without GPS, and shows the operator against the BIM model where to dig and where the dig has gone too deep.
- Review no.
- RS-R1327
- Revision
- C
- Read at source
- 11 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the banksman with a level and the pegs. The design in the cab, so the bucket or the screed works to it. G-Earthwork uses LiDAR to place the excavator and the dug ground against the BIM model without GPS; so far shown on one housebuilder's sites in Japan. The catch: hardware fitted to each machine, a design model to feed it, and no published prices.
The catch
So far shown on one housebuilder's sites with its own BIM; no price or general sale is stated.
- Japan: pilot
What it replaces
A surveyor or banksman checking levels around the excavator, and rework from overdig.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with G-Earthwork? Tell us how it went
Source and revisions
Source: 日本コントロールシステムと長谷工コーポレーション 施工支援システムと長谷工版BIMで根伐工事の測量担当者を不要に
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/g-earthwork"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>