Skip to content
REDSTICK⌕
SaaSFlooring and screedsAcoustic floor and impact sound design

FloorCalc

Pick the support type (full surface, point or strip) and a Getzner mat or block, enter room and floor parameters, and get frequency dependent impact and airborne sound improvement with a PDF report, using an ISO 12354 based model.

Review no.
RS-R517
Revision
D
Read at source
11 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces working quantities, fixings and build-ups out from the data sheet, or ringing the technical line. Free or low-cost tools from the product makers: pick the product, enter the job, get the quantity, the build-up or the drawing. Handy at the counter and at tender. Getzner's FloorCalc models impact and airborne sound improvement for its mats and blocks to ISO 12354. The catch: each covers its own maker's products only, and the makers call the results estimates or guides; check it before you order or build to it.

The catch

Works with Getzner materials only, and needs a registered account.

Who forAcoustic consultants, designers and flooring specifiers sizing floating floors on resilient layers.
By whomGetzner Werkstoffegetzner.com ↗
Releasednot stated by the maker
Sold in
North America
  • United States: on sale
PriceFreeFree to use after registration.

What it replaces

Hand calculations or asking the maker for an impact sound prediction.

Who else does it

Compare all 5 for acoustic floor and impact sound design side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with FloorCalc? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Getzner: FloorCalc calculation tool

Availability read at: United States

RevDateChange
D15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
C11 Nov 2026Re-read at source (hunt run 2026-11-11u): Where it is sold: read at the maker's own site.
B9 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09v).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/floorcalc"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>