Skip to content
REDSTICK⌕
SaaSInsulation and waterproofingThermal imaging surveys and reports

FLIR MR277 Building Inspection System

A handheld building inspection meter that pairs a thermal imager (with visual detail blended in) with pinless and pin moisture readings and a replaceable humidity and temperature sensor, so a surveyor can see a cold or wet patch and measure it on the same screen and save the images for a report.

Review no.
RS-R2405
Revision
B
Read at source
17 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

FLIR's meter puts a thermal image and moisture and humidity readings on one screen, listed at $1,900 on the maker's page, with a low resolution 160 x 120 thermal sensor by the maker's figure.

This kind of tool · Testing, inspection and ground records

Replaces the clipboard, the dial gauge read by eye and the result typed up back at the office. Instruments and inspections that record the reading as it is taken and keep it against the job.

The catch: each is tied to its own maker's kit or sold as a service, and the reading still needs a competent person to interpret it.

The same note is on all 20 tools of this kind.

The catch

The thermal sensor is low resolution (160 x 120, the maker's figure); reporting runs through the maker's own desktop software.

Who forBuilding surveyors, inspectors, restoration and damp specialists, and contractors checking for moisture, leaks and missing insulation.
By whomTeledyne FLIRflir.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PricePurchaseListed at $1,900.00 on the maker's flir.com product page.

What it replaces

Carrying a separate moisture meter, hygrometer and thermal camera.

Who else does it

Compare all 6 for thermal imaging surveys and reports side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with FLIR MR277 Building Inspection System? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: FLIR MR277 Building Inspection System with Moisture Hygrometer & MSX IR Camera

RevDateChange
B17 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A17 Nov 2026First read at source (hunt run 2026-11-17v).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/flir-mr277-building-inspection-system"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>