fischer Construction Monitoring
Bolts, threaded anchor rods and washers with force sensors built in, which measure the preload in a structural connection. Readings are taken by phone over NFC, or sent automatically by a radio module over LoRaWAN to the maker's cloud, where a dashboard and app show each fixing's state for the structure's owner and inspectors.
- Review no.
- RS-R1903
- Revision
- C
- Read at source
- 15 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the clipboard, the dial gauge read by eye and the result typed up back at the office. Instruments and inspections that record the reading as it is taken and keep it against the job. fischer's sensor bolts and anchors measure preload in a connection, read by phone or LoRaWAN to a dashboard; its own fixings only. The catch: each is tied to its own maker's kit or sold as a service, and the reading still needs a competent person to interpret it.
The catch
Only the maker's own sensor fixings can be monitored, so existing bolts must be swapped or fitted with SensorDisc, and the automatic readings need the SensorNode radio module; no price is published.
What it replaces
Periodic retightening and manual torque checks of bolted and anchored connections, often at hard to reach points.
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with fischer Construction Monitoring? Tell us how it went
Source and revisions
Source: fischer Construction Monitoring, fischer
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/fischer-construction-monitoring"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>