Skip to content
REDSTICK⌕
SaaSStructural steelSteel fabrication management

FabStation-STEEL

Shop floor app and HoloLens 2 view that shows part and assembly drawings and the 3D model in place on the steel, so fitters and inspectors check parts, orientation and location against the model without a tape.

Review no.
RS-R1355
Revision
C
Read at source
11 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the production planner's whiteboard, the paper folders on the factory floor and walking the yard to find a unit. Software on the shop floor itself: the batch, the part and the check recorded as the work is done. FabStation-STEEL shows part drawings and the 3D model in place on the steel through a tablet or HoloLens 2, so fitters check parts without a tape; the headset or iPad Pro is bought separately. The catch: each needs its own hardware in the plant, and neither publishes a price.

The catch

The headset option needs a HoloLens 2 and the AR tablet option an iPad Pro (2020 or later), bought separately; alignment relies on a QR marker and magnets placed on each assembly.

Who forStructural steel fabricators: fitters, QC inspectors, shop managers and detailers.
By whomFabStation (Eterio Realities Inc.)fabstation.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceSubscriptionSubscription per device (Tablet/Phone/PC, AR Tablet, HoloLens), adoption training included; no figures published, demo to get a price.

What it replaces

Paper shop drawings and tape measure checks on assemblies.

Who else does it

Compare all 8 for steel fabrication management side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with FabStation-STEEL? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: FabStation Products | AR software for steel fabrication

RevDateChange
C15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
B12 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A11 Nov 2026First read at source (hunt run 2026-11-11a).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/fabstation-steel"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>