excav PILOT
A 3D GNSS guidance system for earthmoving machines. One GNSS sensor goes in a frame on the bucket and attaches with magnets, with no wiring or bolting; a tablet in the cab shows the bucket against the design. The app reads PDF plans and imports LandXML and DXF terrain models, and takes RTK corrections from a service or a base station. The maker says setup and calibration take about 5 minutes and quotes a relative accuracy of plus or minus 15 mm. A two-sensor PILOT PLUS is offered for trenching and sewer work.
- Review no.
- RS-R1546
- Revision
- C
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces the banksman with a level and the pegs. The design in the cab, so the bucket or the screed works to it. excav PILOT clips one GNSS sensor to the bucket by magnet with no wiring, reads PDF plans as well as LandXML and DXF, and the maker quotes about 5 minutes to set up and plus or minus 15 mm; EUR 16,750 a system excluding VAT, EUR 19,900 with two sensors for trenching. The catch: hardware fitted to each machine, a design model to feed it, and only a few publish a price.
The catch
It guides the operator, it does not drive the machine. It needs RTK correction data, from a paid service or its own base station, and each bucket or tool needs a welded sensor frame and a one-time calibration. The single-sensor version is the maker's base kit; trenching and sewer work is pitched at the dearer two-sensor version.
- Austria: through a distributor
- Germany: through a distributor
What it replaces
A permanently installed machine control system on each machine, or a banksman checking levels with a staff and laser.
Who else does it
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with excav PILOT? Tell us how it went
Source and revisions
Source: excav PILOT: precise earthworks in civil engineering
Availability read at: Austria · Germany
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/excav-pilot"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>