Skip to content
REDSTICK⌕
SaaSEarthworks and excavationExcavation and earthmoving

eSurvey eME30

An excavator guidance kit of GNSS antennas, tilt sensors and an Android display that shows the bucket tip's 3D position against the design, with no go zones and a cloud record of the work.

Review no.
RS-R2381
Revision
B
Read at source
17 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

eSurvey's 3D GNSS excavator guidance shows the bucket against the design and needs an RTK correction source.

This kind of tool · Machine control for excavators, dozers and graders

Replaces the banksman with a level and the pegs. The design in the cab, so the bucket or the blade works to it.

The catch: hardware fitted to each machine, a design model to feed it, and only a few publish a price.

The same note is on all 25 tools of this kind.

The catch

Needs an RTK correction source (CORS or a radio base), and the page does not say which design file formats it loads.

Who forGroundworks contractors and excavator operators digging to level and profile.
By whomShanghai eSurvey GNSS Co. Ltd
China
esurvey-gnss.com ↗
Releasednot stated by the maker
Sold innot stated by the maker
PriceNot publishedNo price published.

What it replaces

Grade pegs, banksman checks and repeated setting out during digging.

Who else does it

Compare all 47 for excavation and earthmoving side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with eSurvey eME30? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: eSurvey eME30

RevDateChange
B17 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A17 Nov 2026First read at source (hunt run 2026-11-17u).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/esurvey-eme30"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>