Skip to content
REDSTICK⌕
SaaSPartitions and ceilingsPartition and drylining system selection and specification to a manufacturer's system

ClarkDietrich iTools (with iProSTUD)

A web and mobile tool set from a steel framing maker: iProSTUD picks ProSTUD drywall stud systems by wall height, STC and UL fire rating and gives limiting heights and ceiling spans; it also compares costs between ClarkDietrich products and builds submittal PDFs.

Review no.
RS-R905
Revision
D
Read at source
10 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces leafing through the manufacturer's white book or ringing the technical line to find a wall that meets the fire, acoustic and height spec. Free or nearly free tools from the board and stud makers: set the performance, get the system, the data sheets and the BIM file. ClarkDietrich's iTools picks ProSTUD systems by height, STC and UL rating and builds submittal PDFs; US. The catch: each covers its own maker's systems only, to its own country's tests and codes, and most here are US, Australian or New Zealand.

The catch

Covers ClarkDietrich products only, with heights in feet and inches to US test listings.

Who forDrywall and framing contractors and architects specifying non-structural steel stud partitions and ceilings in North America.
By whomClarkDietrichclarkdietrich.com ↗
Released2013
Sold innot stated by the maker
PriceNot publishedPrice not published.

What it replaces

Reading limiting height tables and UL listings by hand and assembling submittal packs.

Features

Used on the phone, on site
✓ Yes

Who else does it

Compare all 9 for partition and drylining system selection and specification to a manufacturer's system side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with ClarkDietrich iTools (with iProSTUD)? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: ClarkDietrich iTools

RevDateChange
D15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
C10 Nov 2026Re-read at source (hunt run 2026-11-10v): Feature cells read at source: 1
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A10 Nov 2026First read at source (hunt run 2026-11-10t).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/clarkdietrich-itools"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>