Skip to content
REDSTICK⌕
SaaSStructural steelPrecast and modularLight gauge steel framing design and roll forming

CFS Designer

Windows software that designs cold-formed steel members to AISI specifications: wall studs, openings, stacked walls up to 10 storeys, joists, rafters, X-braces, shear walls and connectors, with a wind load module, PDF reports and AutoCAD export of openings.

Review no.
RS-R904
Revision
D
Read at source
10 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the framer's engineer and detailer working out every stud, then the operator keying parts into the machine. Software that frames the building in light gauge steel (or timber), checks it and sends the parts straight to the roll former. Simpson's CFS Designer designs studs, joists, shear walls and connectors to US AISI codes for USD 349. The catch: several are tied to one maker's machines, and the codes are mostly American.

The catch

Windows only; designs to US AISI codes; each upgrade cycle (next January 2027) must be bought to keep updates and support.

Who forEngineers and framing contractors designing light gauge steel walls, including high interior partitions and curtain wall backing.
By whomSimpson Strong-Tiestrongtie.com ↗
ReleasedSep 2026
Sold innot stated by the maker
PricePurchaseUSD 349 for one user, 399 for two, 449 for three, 499 for a site licence; 14-day free trial.

What it replaces

Hand AISI calculations and load tables for steel stud walls and headers.

Features

Works offline
✓ Yes

Who else does it

Compare all 7 for light gauge steel framing design and roll forming side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with CFS Designer? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: CFS Designer

RevDateChange
D15 Nov 2026Gaps not stated by the maker put on the fixed list (0033).
C10 Nov 2026Re-read at source (hunt run 2026-11-10v): Feature cells read at source: 1
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A10 Nov 2026First read at source (hunt run 2026-11-10t).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/cfs-designer"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>