Skip to content
REDSTICK⌕
SaaSEarthworks and excavationDrainage and utilitiesEarthworks cut and fill takeoff

Carlson Takeoff

Earthwork and trench takeoff software that runs in a CAD engine. You work from DWG files or trace PDF and scanned plans, and it gives cut and fill, subgrade, strata, topsoil strip and over-excavation volumes, mass haul, and trench cut, backfill and pipe lengths by size. It then prepares the surfaces for stakeout and Topcon, Trimble or Leica machine control.

Review no.
RS-R763
Revision
C
Read at source
12 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the cut and fill worked out from sections and a planimeter, or guessed. Earthworks takeoff: bring in the levels, get the volumes, the topsoil strip and the balance. The win is pricing muck shift on numbers. Carlson Takeoff gives cut and fill, strata and trench quantities in a CAD engine. The catch: the volumes are only as good as the levels you feed it.

The catch

Needs a CAD engine: the bundled IntelliCAD, a built-in AutoCAD engine, or your own AutoCAD. Price is not published.

Who forEstimators at earthworks, grading and pipe laying contractors who work from CAD drawings.
By whomCarlson Softwareinfo.carlsonsw.com ↗
Releasedto check
Sold innot stated by the maker
PriceNot publishedNot published on the maker's page.

What it replaces

Hand takeoff from paper plans and separate tools for trench quantities and machine control files.

Who else does it

Compare all 8 for earthworks cut and fill takeoff side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with Carlson Takeoff? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: Carlson Takeoff, Carlson Software

RevDateChange
C12 Nov 2026Re-read at source (hunt run 2026-11-12s): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A9 Nov 2026First read at source (hunt run 2026-11-09b).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/carlson-takeoff"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>