Skip to content
REDSTICK⌕
SaaSConcreteReinforcementRebar detailing and bar bending schedules

ArmCAD

An add-on that runs inside AutoCAD or BricsCAD for drawing reinforcement details. It marks and counts the bars, checks for errors and generates bar and mesh schedules, quantity summaries and mesh cutting plans, with British shape codes assigned automatically.

Review no.
RS-R830
Revision
C
Read at source
12 Nov 2026
Disclosure
None
Method
Read at the maker’s own source. Redstick has not used it.

Assessment

Replaces the detailer drawing every bar and counting them again for the bending schedule. Detailing in CAD or a 3D model, with the bar schedule (and in some, the bending machine file) produced from the drawing. ArmCAD details in AutoCAD or BricsCAD with British shape codes assigned automatically and mesh cutting plans; 2D, needs full AutoCAD. The catch: almost all sit on someone else's CAD (AutoCAD, Revit, Bentley), and few publish a price.

The catch

Needs a full AutoCAD (not LT) or BricsCAD Pro or above, on Windows. 2D detailing, not a 3D model. No price published.

Who forStructural engineers and detailers drawing concrete reinforcement in 2D CAD.
By whomRadimpex Software
Serbia
radimpex.rs ↗
Releasedto check
Sold in
Europe
  • Serbia: on sale
PriceNot publishedNo price published; contact the maker.

What it replaces

Counting bars and writing bar schedules by hand from reinforcement drawings.

Who else does it

Compare all 13 for rebar detailing and bar bending schedules side by side →

From people who've worked with it

None yet. If you’ve used it on a job, yours could be the first.

Worked with ArmCAD? Tell us how it went

Your own experience, in your own words: what you used it for, what it did well, what you’d warn someone about. John reads every report before anything goes on the page, and it goes on under your name, role and company, dated. No star ratings.

Source and revisions

Source: ArmCAD, Radimpex

RevDateChange
C12 Nov 2026Re-read at source (hunt run 2026-11-12z): Where it is sold: read at the maker's own site.
B10 Nov 2026Assessment drafted from John's earlier assessments, approved by John: now Reviewed.
A10 Nov 2026First read at source (hunt run 2026-11-10r).

Are you the maker?

This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.

Listed on Redstick
<a href="https://redstick.io/reviews/armcad"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>