AITHON
A tethered drone that flies to a concrete surface at height, clamps on by suction and carries a tool: it drills cores up to 80 mm, scans with ground-penetrating radar, locates and marks rebar, runs rebound hammer and corrosion tests, and fits monitoring sensors. Flown by the maker's own crew.
- Review no.
- RS-R1541
- Revision
- C
- Read at source
- 13 Nov 2026
- Disclosure
- None
- Method
- Read at the maker’s own source. Redstick has not used it.
Assessment
Replaces drilling blind and hitting a bar, or breaking out to check cover. Radar, ultrasound and half-cell kit that show the bars, the voids and where the steel is likely corroding. AITHON's tethered drone clamps to concrete at height up to 60 m to core, scan, mark rebar and test, flown by the maker's own crew. The catch: depth is only as good as the calibration and the conditions (the makers say so), and the best kit is dear.
The catch
Works up to 60 m and carries tools up to 5 kg over a small 40 by 40 cm work area; it is flown by the maker's crew rather than bought, and needs a tether to a ground power supply.
What it replaces
Scaffolding, rope access or a cherry picker to reach a structure for testing and sampling.
From people who've worked with it
None yet. If you’ve used it on a job, yours could be the first.
Worked with AITHON? Tell us how it went
Source and revisions
Source: Solution - AITHON Robotics
Are you the maker?
This listing is free and always will be: no maker pays to be listed or placed. If something here is wrong, tell us at hello@redstick.io and we’ll correct it, with the change dated in the revisions above. To link to this page from your own site, copy the badge below.
<a href="https://redstick.io/reviews/aithon"><img src="https://redstick.io/badge.svg" alt="Listed on Redstick" width="180" height="44"></a>