Skip to content
REDSTICK⌕

Compare · job: thermal and condensation analysis of facade details · stage: design and approvals

Thermal and condensation analysis of facade details, side by side

Every tool on the record for thermal and condensation analysis of facade details: 5 software tools, from DELPHIN 6, HTflux, THERM and TRISCO onwards, in alphabetical order. 1 has a free plan. 5 carry an assessment of where they fit on a job and the catch. Each was read at the maker's own source, most recently on 11 November 2026.

ComparingAll 5 toolsChoose which
Show
Scroll right for the rest
Fact
RS-R469 · SaaS · Bauklimatik Dresden Software GmbHDELPHIN 6
RS-R479 · SaaS · HTflux Engineering GmbHHTflux
RS-R422 · SaaS · Lawrence Berkeley National Laboratory (Windows and Daylighting group)THERM
RS-R502 · SaaS · PhysibelTRISCO
RS-R505 · SaaS · Fraunhofer Institute for Building Physics IBPWUFI Pro
At a glance
What it doesDesktop software that simulates heat, moisture and air movement through building details in 1D to 3D, to assess condensation, drying, mould and decay risk.Desktop software for modelling a junction or detail in 2D to get its psi value, surface temperature factor (fRsi) and condensation risk.Desktop program that takes a 2D cross section of a window frame, curtain wall mullion or wall junction, solves heat flow through it by finite elements, and reports U-factor, isotherms, heat-flux vectors and surface temperatures.Desktop software that models a building junction in 3D (or 2D) to get heat loss, thermal bridge values, surface temperatures and, with an add-on, interstitial condensation.Desktop software that simulates how heat and moisture move through a wall, roof or floor build-up hour by hour over years, to judge drying, condensation and rot or mould risk.
Who it's forBuilding physics and energy consultants, and specialists in interior insulation and moisture-damaged buildings.Thermal modellers, facade and envelope designers, and insulation specifiers who need psi values for junctions.Window, curtain wall and facade engineers, and product makers rating frames and details.Thermal modellers, facade engineers and building physics consultants.Building physics consultants and designers, and contractors checking interior insulation, timber build-ups and moisture-sensitive details.
The catchSpecialist tool that needs building physics knowledge to use; the first commercial year costs 1,350 euros with the setup fee.2D only in the standard product; dynamic simulation costs extra in PRO. The condensation check is the Glaser method, not a full moisture simulation.Windows only and 2D only; the newer 8.1 version with moisture modelling is still a beta that the maker says not to use for conventional thermal modelling.Models only orthogonal (block) geometry; curved or angled shapes need Physibel's other products. Prices are not published.Expensive for occasional use and needs building physics knowledge to set up materials and climate; it is one-dimensional, so junctions need the separate 2D product.
AssessmentReplaces assuming a detail works because it's always been done that way. Specialist building physics software that models a junction or a build-up for heat loss, surface temperature and condensation or mould risk. The win is the problem found on the drawing, not as a damp patch two winters later. DELPHIN 6 simulates heat, moisture and air movement in 1D to 3D for drying, mould and decay risk; 1,350 euros the first year. The catch: they need building physics knowledge to set up and to read, and in the wrong hands they give a precise-looking wrong answer.Replaces assuming a detail works because it's always been done that way. Specialist building physics software that models a junction or a build-up for heat loss, surface temperature and condensation or mould risk. The win is the problem found on the drawing, not as a damp patch two winters later. HTflux gives psi values, fRsi and Glaser condensation risk in 2D; from 467 euros a year. The catch: they need building physics knowledge to set up and to read, and in the wrong hands they give a precise-looking wrong answer.Replaces assuming a detail works because it's always been done that way. Specialist building physics software that models a junction or a build-up for heat loss, surface temperature and condensation or mould risk. The win is the problem found on the drawing, not as a damp patch two winters later. THERM is free from Lawrence Berkeley National Laboratory, 2D heat flow through window frames, mullions and junctions; Windows only. The catch: they need building physics knowledge to set up and to read, and in the wrong hands they give a precise-looking wrong answer.Replaces assuming a detail works because it's always been done that way. Specialist building physics software that models a junction or a build-up for heat loss, surface temperature and condensation or mould risk. The win is the problem found on the drawing, not as a damp patch two winters later. TRISCO models a junction in 3D for thermal bridge values and surface temperatures, block geometry only. The catch: they need building physics knowledge to set up and to read, and in the wrong hands they give a precise-looking wrong answer.Replaces assuming a detail works because it's always been done that way. Specialist building physics software that models a junction or a build-up for heat loss, surface temperature and condensation or mould risk. The win is the problem found on the drawing, not as a damp patch two winters later. WUFI Pro (Fraunhofer) simulates heat and moisture through a build-up hour by hour over years, 1D only; 1,130 euros a year. The catch: they need building physics knowledge to set up and to read, and in the wrong hands they give a precise-looking wrong answer.
Buying it
Price shapeSubscriptionSubscriptionFreeBy quoteSubscription
PriceCommercial licence 750 euros a year plus 600 euros one-time fee in the first year. Free student, teaching and 30-day demo licences, not for commercial use.Standard 467 euros a year, PRO 577 euros a year, excluding VAT. 30-day free trial; free for academic use on request.Free to download; the maker says it provides the software free, funded by the US Department of Energy.Annual subscription, price on request. Free for academic and master's thesis use.1,130 euros for a 1-year licence, 3,430 euros for a 5-year licence. Free limited versions for non-commercial use only.
MakerBauklimatik Dresden Software GmbH · GermanyHTflux Engineering GmbH · AustriaLawrence Berkeley National Laboratory (Windows and Daylighting group) · United StatesPhysibel · BelgiumFraunhofer Institute for Building Physics IBP

Every tick links to where we read it. “Not published” means the maker doesn’t say, not that it can’t. A maker’s figure is the maker’s claim, read at its source; we have not measured it. They are in alphabetical order, never by who pays.