Skip to content
REDSTICK⌕

Compare · job: overhead drilling and fixing · stage: m&e

Overhead drilling and fixing, side by side

Every tool on the record for overhead drilling and fixing: 4 robots, from BauBot, Construction anchor robot, Drilling Robot (打孔机器人) and Jaibot, in alphabetical order. On the record so far, 1 is on sale in the UK and between them they are sold in 6 countries. 4 carry an assessment of where they fit on a job and the catch. Each was read at the maker's own source, most recently on 15 November 2026.

ComparingAll 4 toolsChoose which
Show
Scroll right for the rest
Fact
RS-R043 · Robot · fischerBauBot
RS-R906 · Robot · Samsung C&T Corporation (Engineering & Construction Group)Construction anchor robot
RS-R1788 · Robot · Bright Dream RoboticsDrilling Robot (打孔机器人)
RS-R003 · Robot · HiltiJaibot
At a glance
What it doesA mobile robot that drills and installs anchors from the BIM model, with dust extraction and automatic tool change.A robot that drills into concrete ceilings and installs anchors, so hangers for sprinkler pipes and lights can be fixed without people hammer drilling overhead.A robot that drills fixing holes in basement ceilings, finding its positions from the BIM model with lidar and force sensing, extracting dust and steering round reinforcing bars.Reads the drilling plan from the BIM model, then marks and drills overhead fixing holes for M&E on its own.
Who it's forMain contractors and M&E contractors with large numbers of fixings in concrete soffits.Main contractors and MEP and ceiling installers fixing to concrete soffits, first used in underground car parks.Building services and fixing contractors hanging ducts and sprinkler pipes from concrete soffits.M&E and interior fit-out contractors with hundreds of repeat overhead fixings on jobs that have a BIM model.
The catchOnly as a fischer-run service with fischer anchors; needs a BIM model (or fischer builds one); no price published.Samsung C&T's own site robot: not sold or hired, and the maker publishes no accuracy or output figures.It needs a BIM model of the hole positions, and the range page names basement ceilings as its main use.It works from drilling coordinates out of Revit or AutoCAD and needs Hilti's PLT 300 total station; no coordinated model, no use. Reach is about 5 m, per launch reports.
AssessmentReplaces one hard, repetitive job: drilling overhead, laying tiles, tying rebar, fixing boards, setting out. Robots built for one task. Early days: many are the makers' own services or pilots rather than machines you can buy, but this is where site work is heading. fischer's BauBot drills and fixes anchors overhead from the BIM model, as a fischer-run service with fischer anchors. The catch: each does one job in set conditions, and almost none publish a price or output you can plan on.Replaces drawing every option by hand, and the gang on the framing table or the drill overhead. Configurators for modular builders and sites, robot cells that make panels or print concrete as a service, and a contractor's own fixing robot. Samsung C&T's robot drills ceilings and sets anchors for sprinkler and light hangers; its own sites, not sold. The catch: early and mostly sold by demo or as a service, with rates not published.Replaces one hard, repetitive job: drilling overhead, laying tiles, tying rebar, fixing boards, setting out. Robots built for one task. Early days: many are the makers' own services or pilots rather than machines you can buy, but this is where site work is heading. Bright Dream's drilling robot drills basement ceiling fixings from the BIM model with lidar and force sensing, steering round bars and extracting dust. The catch: each does one job in set conditions, and almost none publish a price or output you can plan on.Sold through Hilti with no published price, with users named across Europe. Only worth it where the job has a coordinated model to drill from.
Maker's figures
Accuracy1 mmMaker's figure-Not published-Not published-Not published
Crew1 fischer operatorMaker's figure-Not published-Not published-Not published
What it does
Reads the CAD file directly✓Yes · source-Not published-Not published-Not published
Buying it
Sold inGermanySouth Korea-To checkCanada, Germany, Singapore, United Kingdom +1 more
Price shapeBy quoteNot publishedNot publishedNot published
PriceProject enquiry to fischer; no figures published.Not sold; used on Samsung C&T's own sites.Price not published.Not published; through Hilti (6 Nov 2026).
Released20222019-To checkOct 2020
Makerfischer · GermanySamsung C&T Corporation (Engineering & Construction Group) · South KoreaBright Dream Robotics · ChinaHilti · Liechtenstein

Every tick links to where we read it. “Not published” means the maker doesn’t say, not that it can’t. A maker’s figure is the maker’s claim, read at its source; we have not measured it. They are in alphabetical order, never by who pays.