At a glance
What it doesSoftware that reads 3D laser scans, picks out building and plant elements such as walls, floors, pipes and beams, and passes them as objects to a Revit plug-in so as-built models are drawn faster.A cloud platform for laser scan data: it uploads point clouds from any scanner, turns them into light meshes that stream in a browser, compares them with BIM and CAD models for scan to BIM work, and shares them with unlimited collaborators.Office software that finds and models pipes, steelwork, ducts, walls, conduit and cable trays in a laser scan, so an as-built model is built faster in Revit or plant design tools, and compares the scan with the design model to show what was installed out of place.A modular lidar mapping system carried by hand or flown on an autonomous drone, capturing coloured point clouds of spaces too dangerous or awkward to scan conventionally.A compact tripod laser scanner that captures a room or façade in seconds with photos, registers scans together on site from a tablet, and exports point clouds for scan to BIM.Plug-ins that load laser scan point clouds inside CAD and BIM programs so designers can model and draw existing conditions directly over the scan.A plug-in that runs a trained machine learning model over a 3D scan point cloud, finds and locates the objects in it, and colour codes each category, so an as-built BIM model of an existing building can be started from labelled data rather than a raw scan.Mobile laser scanners worn or carried through a building, with software that aligns the scans and shows them in a browser, plus scan to BIM and checking built work against the model.Laser scan software that converts scanner data, fits walls, doors, windows, pipes and steel or timber sections to the point cloud, makes orthophotos for 2D plans, and sends the geometry live into ALLPLAN, Revit, AutoCAD, BricsCAD, HiCAD and other CAD systems.
Who it's forScan-to-BIM modellers, BIM coordinators, surveyors and owners of buildings and industrial plant.Contractors, VDC and BIM teams, surveyors, engineers and asset owners who capture sites and buildings with laser scanners.Scan to BIM modellers, surveyors, MEP and structural detailers, and contractors' QA and QC teams on building and industrial projects.Surveyors and contractors scanning shafts, tunnels, voids and existing structures.Surveyors, BIM teams and contractors recording existing buildings and as-built work.BIM teams, designers and engineers modelling existing buildings, plant and civil works from scans.Architects, surveyors, retailers and main contractors on retrofit, refurbishment and renovation projects.Surveyors, contractors and owners capturing large buildings and sites quickly.Surveyors, architects and engineers modelling existing buildings, plant and steel structures from laser scans, especially for renovation.
The catchPrice is a personalised quote; the time savings are the maker's own claims.Prices are not published; buying means a demo and a quote after the 30 day trial.No price is published, and it works inside or alongside desktop design tools (Revit, Navisworks, Plant 3D, E3D), so it needs those and a registered scan.Hardware plus software; no price on the page; the drone needs a pilot's permissions.Hardware plus processing software; the price is not on the page.Needs a host CAD or BIM licence; prices are not published.It labels objects in the point cloud; the page does not say it builds the finished BIM elements, and names no host program or file formats.Scanner hardware plus software subscriptions; no prices shown.Needs a supported CAD program to receive the model; the converter page says supported scanners change, and the FAQ says FARO import may no longer work; no price is published.
AssessmentReplaces drawing existing conditions by hand over a point cloud. Software that loads the scan into CAD or picks out walls, pipes and beams as objects. Aurivus picks out building and plant elements from scans and passes them to Revit. The catch: neither publishes a price, and the time savings are the makers' claims.Replaces drawing existing conditions by hand over a point cloud. Software that loads the scan into CAD or picks out walls, pipes and beams as objects, or builds the model from the old paper drawings. Streams laser scans as light meshes in a browser and compares them with the BIM model; no price published, a quote follows a 30 day trial. The catch: the time savings are the makers' claims, and the model is only as complete as the scan or the drawing it came from.Three uses, three benefits. For a renovation, it tells the designers what actually exists before they draw, and the builder the same before they start. For building management, it gives an as-built model of what's really in the walls and ceilings. During a build, it compares the scan with the design and shows what went in out of place. Office software from Topcon that finds pipes, steel, ducts, walls, conduit and cable trays in a laser scan and models them in Revit or plant design tools. The catch: it starts from a registered laser scan, so someone has to scan first, and it works inside desktop design tools you need to own already. No price published.Replaces the tape, the clipboard and the survey day for a refurbishment. From an iPhone floor plan to a walk-through laser scanner that hands you the point cloud for Revit. Exyn Nexys maps spaces too dangerous to enter, carried by hand or flown on an autonomous drone. The catch: the phone apps are good enough for a kitchen, not a structural survey, and the scanners' accuracy is the maker's figure until checked against control.Replaces the tape, the clipboard and the survey day for a refurbishment. From an iPhone floor plan to a walk-through laser scanner that hands you the point cloud for Revit. Leica's BLK360 scans a room in seconds and registers on site from a tablet. The catch: the phone apps are good enough for a kitchen, not a structural survey, and the scanners' accuracy is the maker's figure until checked against control.Replaces drawing existing conditions by hand over a point cloud. Software that loads the scan into CAD or picks out walls, pipes and beams as objects. Leica CloudWorx loads point clouds inside CAD and BIM programs to model over. The catch: neither publishes a price, and the time savings are the makers' claims.Replaces drawing existing conditions by hand over a point cloud. Software that loads the scan into CAD or picks out walls, pipes and beams as objects, or builds the model from the old paper drawings. nCircle's ML Powered Scan to BIM labels the objects in a point cloud by category; the page does not say it builds the finished BIM elements. The catch: the time savings are the makers' claims, and the model is only as complete as the scan or the drawing it came from.Replaces the tape, the clipboard and the survey day for a refurbishment. From an iPhone floor plan to a walk-through laser scanner that hands you the point cloud for Revit. NavVis VLX is worn through a building with IVION showing the scans in a browser. The catch: the phone apps are good enough for a kitchen, not a structural survey, and the scanners' accuracy is the maker's figure until checked against control.Replaces drawing existing conditions by hand over a point cloud. Software that loads the scan into CAD or picks out walls, pipes and beams as objects, or builds the model from the old paper drawings. Scalypso fits walls, pipes and sections to the point cloud and sends them live into ALLPLAN, Revit, AutoCAD and others; the FAQ says FARO import may no longer work. The catch: the time savings are the makers' claims, and the model is only as complete as the scan or the drawing it came from.
Buying it
Sold in-To check-To check-To check-To check-To check-To check-To check-To checkAustralia, Austria, Czechia, France +10 more
Price shapeBy quoteNot publishedNot publishedNot publishedNot publishedBy quoteNot publishedNot publishedNot published
PricePersonalised pricing proposal on requestNot published; 30 day free trial and demo on request.No price published; subscription or maintenance licences sold through ClearEdge3D.-To check-To checkPrice on request; free viewer plug-ins for AutoCAD and RevitNo price published; a 30 day free trial by request, then a subscription.-To checkNo price published; trial licences on request, with maintenance contracts for new releases.
Released-To check2018-To check-To check-To check-To checkNov 2023-To check-To check
Makeraurivus GmbH · GermanyCintooClearEdge3D (a Topcon company) · United StatesExyn TechnologiesLeica Geosystems (Hexagon) · SwitzerlandLeica Geosystems (Hexagon) · SwitzerlandnCircle TechNavVisScalypso (Dr.-Ing. R. König) · Germany