Skip to content
REDSTICK⌕

Compare · job: drilling anchor holes in floors · stage: m&e

Drilling anchor holes in floors, side by side

Every tool on the record for drilling anchor holes in floors: 2 robots, from DALE downward drilling robot and Raise Robotics work cells and Raise AGV, in alphabetical order. 2 carry an assessment of where they fit on a job and the catch. Each was read at the maker's own source, most recently on 11 November 2026.

ComparingAll 2 toolsChoose which
Show
Fact
RS-R555 · Robot · August Robotics (with DEWALT)DALE downward drilling robot
RS-R1315 · Robot · Raise RoboticsRaise Robotics work cells and Raise AGV
At a glance
What it doesA wheeled robot that drives itself to each point on a drilling plan and drills straight down into a concrete floor with a DEWALT SDS Max hammer, extracting the dust. Several can work together on one floor.A robotic work cell set up for each job and mounted on the maker's wheeled AGV or on a Genie scissor or boom lift. Proven tasks: marking layout on slabs from BIM (the maker says to plus or minus 3 mm), drilling anchors and penetrations with every hole logged, fixing curtain wall embeds at the slab edge, and scanning as-built geometry for QA records. A coating cell is in pre-release. Simulation software rehearses the work on a digital copy of the site first.
Who it's forContractors drilling thousands of floor anchors, such as rack stops and support legs in data centres.Main contractors, curtain wall and facade installers, and specialist contractors with repetitive layout, drilling or fixing work on slabs, ceilings and facades.
The catchDrills downward only, up to 1-1/2 in diameter and 14 in deep; needs a guiding station and a drilling plan as CAD or CSV; price not published.Needs a crew trained and certified by the maker to run each cell, a CAD or BIM model to work from, and an AGV or Genie lift to carry it; leases carry an annual minimum; new tasks outside the proven four are paid development work taking weeks to months.
AssessmentReplaces one hard, repetitive job: drilling overhead, laying tiles, tying rebar, fixing boards, setting out. Robots built for one task. Early days: many are the makers' own services or pilots rather than machines you can buy, but this is where site work is heading. August Robotics' DALE drives to each point and drills anchor holes down into the slab with dust extraction; several work together. The catch: each does one job in set conditions, and almost none publish a price or output you can plan on.Replaces the operative on the drill, the breaker, the screed or the jig. A machine that does one repetitive task to the model, with a person setting it up. Raise's work cells drill and mark from the model on an AGV or a Genie lift; the AGV from 40,000 USD. The catch: by quote, a trained crew to run it, and most need a model or a factory to work from.
Buying it
Sold in-To checkUnited States
Price shapeNot publishedPurchase
PricePurchase or lease, price on requestThe Raise AGV base is from 40,000 USD, with lease options; work cells are bought, leased with an annual minimum or financed, priced by quote.
ReleasedSep 2026-To check
MakerAugust Robotics (with DEWALT)Raise Robotics · United States

Every tick links to where we read it. “Not published” means the maker doesn’t say, not that it can’t. A maker’s figure is the maker’s claim, read at its source; we have not measured it. They are in alphabetical order, never by who pays.