At a glance
What it doesCAM software that programs CNC routers from 2D drawings and solid models, with add-ons for angled and 5-axis machining, sheet nesting, batch automation, fixtures and robot output.A CNC carpentry machine that feeds timber through and cuts, mills, drills and marks rafters, beams and joists on all six sides, from CAD files.A fully automated linear saw for frame and truss plants: it picks timber, cuts members to length and angle, compensates for crooked timber and prints plate positions or part marks.An automatic precut machine for Japanese post and beam framing: it cuts traditional joints and slits in large horizontal beams, using a multi-joint robot, from precut CAD data.A CNC beam machining centre: a 6-axis head and a separate saw unit cut, drill and mill solid wood and glulam beams up to 19 m long.A CNC joinery machine that trims, grooves, drills, mills, slots and marks timber beams on all six sides without turning the part, using a 6-axis robot unit and a 5-axis saw unit.A CNC machining centre for wall panels and large beams: it saws, routs and cuts openings in CLT, SIPs and framed walls, and can turn a wall over to work both faces.CNC programming software for timber and panel machining centres. Machining steps such as trimming, drilling, sawing and pockets are set by parameters and shown in 3D with the clamping; it recognises holes, grooves and pockets in imported 3D models. Optional add ons give 3 to 5 axis milling paths, 3D surface design and simulation with collision checks and time calculation.
Who it's forJoinery shops and manufacturers running CNC routers on timber and panels; also stone and metal cutting.Timber frame and prefab building manufacturers and carpentry firms.Frame, truss and floor truss manufacturers.Japanese precut factories supplying timber frame and larger timber buildings.Timber construction firms producing roof, housing and public building beams in volume.Carpentry and timber frame businesses, log and half-timber house makers, and glulam and CLT fabricators.Prefab house producers and timber construction firms machining CLT or wall panels.Joinery, shopfitting, furniture and stair workshops running HOMAG CNC machining centres.
The catchPrice not published; features come as separate add-on modules.Sections only up to 200 x 455 mm; price by call-back only.Cutting speed and section sizes are not on the page; price on request.Sections only up to 180 mm wide; the page is in Japanese and price is not published.Price only on request; sections wider than 300 mm need the xl+ model.No price is published; the machine is configured with Hundegger's engineers and needs their CAMBIUM software and floor space for infeed and outfeed of up to 10 m timbers.Large machine for panels up to 6 m wide; price only by quote.No price or licence terms published; CAM, CAD and simulation are paid add ons. The page does not list which machines it supports.
AssessmentReplaces working cutting patterns out by hand, programming the router at the machine, and a job board on the workshop wall. Cutting optimisers, CAM and shop floor software for joinery and panel workshops. Hexagon's ALPHACAM programs CNC routers from drawings and models, with 5-axis and nesting add-ons. The catch: the serious ones are priced by enquiry and sold in modules, and the production systems are projects to adopt.Replaces the carpenter marking out and cutting joints by hand, beam by beam. CNC machines that cut, drill, mill and mark timber on every face straight from the CAD file. The win is precision, repeatability and output: the factory does in minutes what took a day on site. HOMAG's BEAMTEQ B-660 feeds timber through for rafters, beams and joists, up to 200 x 455 mm. The catch: big capital machines, priced on request and configured with the maker, and only worth it with the volume of work to keep them busy.Replaces the carpenter marking out and cutting joints by hand, beam by beam. CNC machines that cut, drill, mill and mark timber on every face straight from the CAD file. The win is precision, repeatability and output: the factory does in minutes what took a day on site. MiTek's MatchPoint BLADE II is an automated linear saw for truss plants, compensating for crooked timber and printing plate positions. The catch: big capital machines, priced on request and configured with the maker, and only worth it with the volume of work to keep them busy.Replaces the carpenter marking out and cutting joints by hand, beam by beam. CNC machines that cut, drill, mill and mark timber on every face straight from the CAD file. The win is precision, repeatability and output: the factory does in minutes what took a day on site. Miyagawa Koki's MPS-55 cuts traditional Japanese post and beam joints with a robot, up to 180 mm wide. The catch: big capital machines, priced on request and configured with the maker, and only worth it with the volume of work to keep them busy.Replaces the carpenter marking out and cutting joints by hand, beam by beam. CNC machines that cut, drill, mill and mark timber on every face straight from the CAD file. The win is precision, repeatability and output: the factory does in minutes what took a day on site. SCM's oikos x+ machines beams up to 19 m long; wider than 300 mm needs the xl+ model. The catch: big capital machines, priced on request and configured with the maker, and only worth it with the volume of work to keep them busy.Replaces the carpenter marking out and cutting joints by hand, beam by beam. CNC machines that cut, drill, mill and mark timber on every face straight from the CAD file. The win is precision, repeatability and output: the factory does in minutes what took a day on site. Hundegger's ROBOT-Drive works all six sides without turning the part, with a 6-axis robot and 5-axis saw, using Hundegger's CAMBIUM software. The catch: big capital machines, priced on request and configured with the maker, and only worth it with the volume of work to keep them busy.Replaces the carpenter marking out and cutting joints by hand, beam by beam. CNC machines that cut, drill, mill and mark timber on every face straight from the CAD file. The win is precision, repeatability and output: the factory does in minutes what took a day on site. Essetre's Techno Multiwall machines CLT, SIPs and framed wall panels up to 6 m wide, turning a wall to work both faces. The catch: big capital machines, priced on request and configured with the maker, and only worth it with the volume of work to keep them busy.Replaces working cutting patterns out by hand, programming the router at the machine, and a job board on the workshop wall. Cutting optimisers, CAM and shop floor software for joinery and panel workshops. HOMAG's woodWOP programs timber and panel machining centres by parameters, shown in 3D with the clamping. The catch: the serious ones are priced by enquiry and sold in modules, and the production systems are projects to adopt.
Buying it
Sold in-To check-To checkAustralia-To check-To checkAustralia, United Kingdom, United StatesUnited KingdomGermany, United Kingdom
Price shapeNot publishedBy quoteBy quoteNot publishedBy quoteBy quoteBy quoteBy quote
PriceNot published; product enquiry only.No price published; call-back request to HOMAG.No price published; request more information from MiTek.No price on the page; catalogue on request by phone.No price published; request information from SCM.No price published; configured and quoted with Hundegger's engineers.No price published; request a quote from WEINIG.Price on request; free demo version with 50 test starts.
MakerHexagonHOMAG Group (WEINMANN) · GermanyMiTekMiyagawa Koki Co., Ltd.SCM GroupHans Hundegger AGEssetre (WEINIG)HOMAG Group (WEINMANN) · Germany